Market Scenario
According to the MRFR analysis, the globalmodified atmospheric packaging market 2020 is estimated to grow at a CAGR of 5.3% during the estimated period (2020-2027).
Request a Free Sample @ https://www.marketresearchfuture.com/sample_request/2534
Market Highlights
The modified market for atmospheric packaging is growing rapidly, and is likely to continue to grow at the same rate over the forecast period. Modified atmospheric packaging (MAP) helps mitigate the loss of moisture and thus prevents the growth of microbes. MAP 's ability to extend food shelf-life over other packaging technologies is expected to boost its market growth. The high degree of restriction offered by MAP, which prohibits food interaction with atmospheric oxygen and causes contamination, is responsible for its high demand in the cash-rich food and beverage industry.
Segmentation
On the basis of the material, the market has been segmented into polyethylene terephthalate (PET), polyvinyl chloride (PVC), polypropylene (PP), ethylene vinyl alcohol (EVOH), and polyethylene (PE). Ethylene Vinyl alcohol had accounted for the largest share in the material segment of the global modified atmospheric packaging market. EVOH material offers excellent gas barrier properties while retaining good processing. EVOH bars oxygen and retains nitrogen and carbon dioxide used in the modified atmosphere packaging (MAP). This material also has a very high resistance to oils and preserves taste and aroma. On the other hand, polyethylene is also the most common plastic material used in daily life and can contribute to overall market revenue over the forecast period. Polyethylene is accepted as safe for contact with foods by FDA and health safety agencies around the world.
On the basis of application, the global modified atmospheric packaging market is segmented into fruits & vegetables, convenience food, dairy products, bakery & confectionery, and others. Bakery & confectionery accounted for the largest share of the global modified atmospheric packaging market. Bakery products contain a large number of bread-based products. To increase the shelf life, bread-based products required a high proportion of carbon dioxide in packaging solutions. Hence, this will increase the adoption of this technology during the estimated period. Recently, Stewart Systems launched a bulk packaging system for buns with MAP for fast-food service restaurants. The air in the packaging is removed with a vacuum and the bag is filled with nitrogen gas for extending the life of buns by 21 days.
On the basis of the gases, the market has been segmented into carbon dioxide, nitrogen, oxygen, and others. Carbon dioxide is the most important gas in food packaging under modified atmospheric packaging.
Regional Analysis
On the basis of the regions, the global modified atmospheric packaging market has been segmented into North America, Europe, Asia Pacific (APAC), and Rest of the World (RoW). North America leads the global modified atmospheric packaging market. Increasing demand for wrapped food in this region is propelling the growth of the market. The U.S. holds the largest market share in the North American region. Increasing concerns about hygienic packaging also increased the demand for modified atmosphere packaging as it reduces contamination during handling.
Europe is accounted for the second largest share of the global MAP market and is expected to contribute significantly to the market growth during the forecast period. Germany is one of the top meat producers in EU. It also leads the European market in the production and export of pork and taken the second spot for beef production with a share of 15%. This has increased the need for proper packaging of meat, which can drive the growth of the modified atmospheric packaging market.
APAC is anticipated to grow at the highest CAGR during the forecast period due to the rapid growth in the packaging business. Expansion of the urban population and high disposable income levels can increase the demand for packaged food and beverages. Australia, China, India, Japan, and Indonesia are major contributors to the APAC market. China accounted for the largest share of the regional market due to rapid growth in urbanization and industrial development.
Competitive Outlook
Robert Reiser & Co., Inc., Amcor Limited, Bemis Company Inc., Linpac Packaging Limited, Coveris Holdings S.A., Total Packaging Solutions, LLC, Ilapak Packaging Machinery, Sealed Air Corporation, Berry Plastics Corporation, Dansensor A/S, Linde AG, Hayssen Flexible Systems, Winpak Ltd., CVP Systems Inc., and Praxair Inc. are key players of the global modified atmospheric packaging market.
Access Report Details @ https://www.marketresearchfuture.com/reports/modified-atmospheric-packaging-market-2534
Browse Related Reports:
Global Produce Packaging Market Research Report: Information by Packaging Type (Corrugated Boxes, Bags and Liners, Plastic Containers and Trays), Application (Vegetables, Fruits and Salads), End User (Growers/Shippers, Re-Packers and Retail Stores) and Region (North America, Europe, Asia-Pacific, Middle East & Africa and South America) - Forecast till 2025
Global Pallet Racking Market Research Report: Information by System (Conventional, Mobile Racking, Shuttle Racking and Hybrid/Customized Racking), Racking System Type (Cantilever Racking, Selective Racking, Push Back Racking, Drive-In Racking, Pallet Flow Racking, Carton Flow Racking and others), Frame Load Capacity (Up to 5 Ton, 5–15 Ton and Above 15 Ton), End-Use Industry (Automotive, Food & Beverage, Retail, Manufacturing, Warehouse & Logistics and others) and Region (North America, Europe, Asia-Pacific and South America) - Forecast till 2025
Global Dry Bulk Shipping Market: Information by Type (Capesize, Panama, Supramax and Handysize), Application (Iron Ore, Coal, Grains, Bauxite/Alumina and Phosphate Rock) and Geography - Forecast till 2025
Global Temperature-Controlled Packaging for Pharmaceutical Market: By Product (Insulated Shippers and Insulated Containers), By Type (Active Systems and Passive Systems), By Temperature Range (Up to 10°C, 10°C to 20°C and More than 20°C), By Payload Capacity (Up to 10 L, 10-20 L, 20-40 L, 40-150 L and More than 150 L), By Type of Use (Single Use and Reusable), By End-Use Industry (Pharmaceutical and Clinical Trial) and By Region - Forecast Till 2023
Global Plastic Rigid IBC Market Research Report, By Material (High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Linear Low Density Polyethylene (LLDPE), Polyvinyl Chloride (PVC), and Others), Capacity (Up to 500 liters, 500 to 1000 liters, 1000 to 1500 liters, 1500 to 2000 liters, and above 2000 liters), End Use (Industrial Chemicals, Petroleum & Lubricants, Food & Beverages, Paints Inks Dyes, Pharmaceuticals, and Others) — Forecast till 2023
Returnable Packaging Market By Material (Plastic, Metal, Wood and Others), Product Type (Pallets, Crates, Intermediate Bulk Container (IBC), Dunnage, Drums & Barrels, Bottles and Others), End Use (Automotive, Food & Beverages, Pharmaceuticals & Healthcare, and Consumer Goods) - Global Forecast till 2023
Global Agricultural Packaging Market Research Report— by Material (Plastic, Paper & Paperboard, Metal, Glass), Product (Pouches, Bags, Bottles, Trays), Barrier Strength (High, Medium, Low), Application (Chemical Pesticides, Chemical Fertilizers, Biologicals) and Region — Forecast till 2023
Global Collapsible Metal Tubes Market Research Report by Product Type (Squeeze Tube, Twist Tube, Others), by Closure Type (Standup Cap, Nozzle Cap, Fez Cap, Flip Top Cap, Others), by Capacity (Less than 20 ml, 20 to 100 ml, More than 100 ml), by End-use (Cosmetics, Industrial, Pharmaceutical, Food, Homecare & Personal Care, Others), and Region - Forecast to 2023
Global Bulk Bags Market Research by Fabric Type (Type A, Type B, Type C, Type D) by Capacity (Small up to 0.75 cu.m, Medium 0.75 to 1.5 cu.m, Large Above 1.5 cu.m) by Design (U-Panel Bags, Four Side Panels, Baffles, Circular/Tabular, Cross Corners, others) by End-use (Chemicals & Fertilizers, Food, Construction, Pharmaceuticals, Mining, Others) - Forecast to 2023
Global Thin Wall Packaging Market Research Report by Product Type (Tubs, Cups, Trays, Jars, Clamshells, Pots, Lids), Material (Polypropylene, High Density Polyethylene, Polyethylene Terephthalate, Polystyrene, Polyvinyl Chloride, and Others), Production Process (Injection Molding, Thermoforming, and Others), Application (Food & Beverages, Electronics, Cosmetics and Others), By Region (North America, Europe, Asia-Pacific and Rest-of-the-World) - Forecast to 2023
Related Links
Multi-Med Adherence Packaging Market
Perfume Packaging Market
Transparent Barrier Packaging Films Market
Direct Thermal Labels Market
Molded Fiber Packaging Market
Child Resistance Packaging Market
Bulk Packaging Market
Packaging Tape Printing Market
Food Service Packaging Market
Electrostatic Discharge Packaging Market
Electronic Goods Packaging Market
Security Paper Market
Green Packaging Market
Composite Packaging Market
Pet Bottle Recycling Market
Plastic Recycling Market
Industrial Tape Market
Digital Printing Packaging Market
Packaging Foams Market
Vacuum Skin Packaging Market
About Market Research Future:
Market Research Future (MRFR) is a global market research company that takes pride in its services, offering a complete and accurate analysis with regard to diverse markets and consumers worldwide. Market Research Future has the distinguished objective of providing the optimal quality research and granular research to clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help answer your most important questions.
Contact
Market Research Future Office No. 528, Amanora Chambers Magarpatta Road, Hadapsar, Pune 411028 Maharashtra, India +1 646 845 9312 Email:sales@marketresearchfuture.com
Opmerkingen